Probleme mit dem Beamer Package

[brainybrown]

Hallo zusammen,
ich habe ein Problem, wo ich irgendwie fast schon am Verzweifeln bin:
Und zwar nutze ich seit Jahren schon so ein Präsentationstemplate unserer Uni - welches auf dem Beamer Package basiert. Das hat alle die Jahre auch super geklappt.
Doch nun musste ich neulich mein System neu aufsetzen und daher auch Latex und Miktex neu installieren. Und jetzt kommt leider ein Fehler nach dem anderen, wenn ich versuche das gleiche Template zu kompilieren.
An den Eigenheiten des uniinternen Templates kann es meiner Meinung nach nicht liegen, da auch ein sehr rudimentäres Skript, welches auf das beamer package zugreift, bereits dutzende Fehler wirft (Skript und Logfile siehe unten).
Hat Jemand zufällig ne Idee, woran das liegen könnte, und was ich dagegen machen kann?! Wäre echt supernett, wenn mir da Jemand helfen könte. Bin noch relativ unerfahren mit Latex.

Meine Software:
Windows 7 32 bit professional
MikTex 2.9
TexnicCenter 1.0 stable version
Beamerpackage 2010-07-27 (habe ich mehrfach runtergeworfen und neu installiert)

rudimentäres Skript:

\documentclass{beamer}
\usepackage[latin1]{inputenc}
\usetheme{Warsaw}
\title[Make a LaTeX presentation using Beamer]{Introduction  to Beamer\\How to make a presentation with LaTeX?}
\author{Nadir Soualem -- Astozzia}
\institute{Math-linux.com}
\date{Jule 13, 2007}
\begin{document}

\begin{frame}
\titlepage
\end{frame}


\begin{frame}{Introduction}
This is a short introduction to Beamer class.
\end{frame}

\end{document}

Auszug aus den Fehlermeldungen:

This is pdfTeX, Version 3.1415926-1.40.11 (MiKTeX 2.9) (preloaded format=pdflatex 2011.4.10)  11 APR 2011 11:22
entering extended mode
**C:/Users/brainybrown/studi/ma/scientificResults/Referat/session1.tex
(C:/Users/brainybrown/studi/ma/scientificResults/Referat/session1.tex
LaTeX2e <2009/09/24>
[...]
("C:\Program Files\MiKTeX 2.9\tex\latex\beamer\base\beamer.cls"
("C:\Program Files\MiKTeX 2.9\tex\latex\beamer\base\beamerbasercs.sty"
Package: beamerbasercs 2010/06/12 (rcs-revision c3821710bb40)
)
Document Class: beamer 2010/06/21 development version 3.10 A class for typesett
ing presentations (rcs-revision a6b1a8434d30)
("C:\Program Files\MiKTeX 2.9\tex\latex\beamer\base\beamerbasemodes.sty"
Package: beamerbasemodes 2010/05/01 (rcs-revision efa082c6111d)
\beamer@tempbox=\box26
\beamer@tempcount=\count79
\c@beamerpauses=\count80

[...]

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.12 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.12 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.12 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.12 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.12 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.12 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.12 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.12 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.12 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.17 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.17 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.17 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.17 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.17 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.17 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.17 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.17 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.17 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.17 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.17 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.17 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.17 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\hyper@link ...d@pdflink {#1}{#2}#3\Hy@xspace@end 
                                                  \close@pdflink 
l.17 \end{frame}
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

[2

]
\tf@nav=\write6
\tf@toc=\write7
\tf@snm=\write8
Package atveryend Info: Empty hook `BeforeClearDocument' on input line 19.
Package atveryend Info: Empty hook `AfterLastShipout' on input line 19.
 (C:\Users\brainybrown\studi\ma\scientificResults\Referat\session1.aux)
Package atveryend Info: Executing hook `AtVeryEndDocument' on input line 19.
Package rerunfilecheck Info: File `session1.out' has not changed.
(rerunfilecheck)             Checksum: D41D8CD98F00B204E9800998ECF8427E;0.


LaTeX Font Warning: Size substitutions with differences
(Font)              up to 1.0pt have occurred.

 ) 
Here is how much of TeX's memory you used:
 15201 strings out of 494053
 287681 string characters out of 3148585
 360240 words of memory out of 3000000
 18093 multiletter control sequences out of 15000+200000
 5452 words of font info for 20 fonts, out of 3000000 for 9000
 715 hyphenation exceptions out of 8191
 49i,16n,57p,483b,549s stack positions out of 5000i,500n,10000p,200000b,50000s

Output written on session1.pdf (2 pages, 48230 bytes).
PDF statistics:
 89 PDF objects out of 1000 (max. 8388607)
 5 named destinations out of 1000 (max. 500000)
 63 words of extra memory for PDF output out of 10000 (max. 10000000)

Über eine Antwort würde ich mich sehr freuen.
Viele Grüße, Niclas!

[Xenara]

Dein Code ist in Ordnung. Das Beispiel läuft bei mir mit TeXLive2010, aktuellste Version, auf WinXP mit TeXnicCenter 1.0 einwandfrei.
Wie sieht denn deine FileList aus? (\listfiles noch vor \documentclass... setzen, FileList ist dann im .log-File)
Bei mir kommt das raus:

 *File List*
  beamer.cls    2010/06/21 development version 3.10 A class for typesetting pre
sentations (rcs-revision a6b1a8434d30)
beamerbasercs.sty    2010/06/12 (rcs-revision c3821710bb40)
beamerbasemodes.sty    2010/05/01 (rcs-revision efa082c6111d)
beamerbasedecode.sty    2010/05/01 (rcs-revision efa082c6111d)
beamerbaseoptions.sty    2010/04/27 (rcs-revision 982469101dd6)
  keyval.sty    1999/03/16 v1.13 key=value parser (DPC)
geometry.sty    2010/09/12 v5.6 Page Geometry
   ifpdf.sty    2010/01/28 v2.1 Provides the ifpdf switch (HO)
  ifvtex.sty    2010/03/01 v1.5 Switches for detecting VTeX and its modes (HO)
 ifxetex.sty    2010/09/12 v0.6 Provides ifxetex conditional
  size11.clo    2007/10/19 v1.4h Standard LaTeX file (size option)
 pgfcore.sty    2010/04/11 v2.10 (rcs-revision 1.7)
graphicx.sty    1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR)
graphics.sty    2009/02/05 v1.0o Standard LaTeX Graphics (DPC,SPQR)
    trig.sty    1999/03/16 v1.09 sin cos tan (DPC)
graphics.cfg    2010/04/23 v1.9 graphics configuration of TeX Live
  pdftex.def    2011/01/28 v0.05d Graphics/color for pdfTeX
  pgfsys.sty    2010/06/30 v2.10 (rcs-revision 1.37)
  pgfrcs.sty    2010/10/25 v2.10 (rcs-revision 1.24)
everyshi.sty    2001/05/15 v3.00 EveryShipout Package (MS)
  pgfrcs.code.tex
  pgfsys.code.tex
pgfsyssoftpath.code.tex    2008/07/18  (rcs-revision 1.7)
pgfsysprotocol.code.tex    2006/10/16  (rcs-revision 1.4)
  xcolor.sty    2007/01/21 v2.11 LaTeX color extensions (UK)
   color.cfg    2007/01/18 v1.5 color configuration of teTeX/TeXLive
 pgfcore.code.tex
 xxcolor.sty    2003/10/24 ver 0.1
hyperref.sty    2011/03/09 v6.82d Hypertext links for LaTeX
 ltxcmds.sty    2010/04/26 v1.7 LaTeX kernel commands for general use (HO)
pdftexcmds.sty    2010/04/01 v0.9 Utility functions of pdfTeX for LuaTeX (HO)
infwarerr.sty    2010/04/08 v1.3 Providing info/warning/message (HO)
ifluatex.sty    2010/03/01 v1.3 Provides the ifluatex switch (HO)
kvsetkeys.sty    2010/03/01 v1.9 Key value parser (HO)
etexcmds.sty    2010/01/28 v1.3 Prefix for e-TeX command names (HO)
pdfescape.sty    2010/03/01 v1.9 Provides hex, PDF name and string conversions 
(HO)
 hycolor.sty    2009/12/12 v1.6 Color options of hyperref/bookmark (HO)
xcolor-patch.sty    2009/12/12 xcolor patch
letltxmacro.sty    2008/06/24 v1.3 Let assignment for LaTeX macros (HO)
kvoptions.sty    2010/02/22 v3.7 Keyval support for LaTeX options (HO)
  pd1enc.def    2011/03/09 v6.82d Hyperref: PDFDocEncoding definition (HO)
 intcalc.sty    2007/09/27 v1.1 Expandable integer calculations (HO)
hyperref.cfg    2002/06/06 v1.2 hyperref configuration of TeXLive
     url.sty    2006/04/12  ver 3.3  Verb mode for urls, etc.
  bitset.sty    2007/09/28 v1.0 Data type bit set (HO)
bigintcalc.sty    2007/11/11 v1.1 Expandable big integer calculations (HO)
atbegshi.sty    2010/03/25 v1.12 At begin shipout hook (HO)
 hpdftex.def    2011/03/09 v6.82d Hyperref driver for pdfTeX
atveryend.sty    2010/03/24 v1.5 Hooks at very end of document (HO)
rerunfilecheck.sty    2010/03/16 v1.6 Rerun checks for auxiliary files (HO)
uniquecounter.sty    2009/12/18 v1.1 Provides unlimited unique counter (HO)
beamerbaserequires.sty    2010/05/01  (rcs-revision efa082c6111d)
beamerbasecompatibility.sty    2010/07/12  (rcs-revision 6648c3177e4e)
beamerbasefont.sty    2010/05/10  (rcs-revision cd36e8a33c6b)
 amssymb.sty    2009/06/22 v3.00
amsfonts.sty    2009/06/22 v3.00 Basic AMSFonts support
beamerbasetranslator.sty    2010/06/11  (rcs-revision 85fd1cc7fc42)
translator.sty    2010/06/12 ver 1.10
translator-language-mappings.tex
beamerbasemisc.sty    2010/06/06  (rcs-revision bff0a9294b45)
beamerbasetwoscreens.sty    2010/05/01  (rcs-revision efa082c6111d)
beamerbaseoverlay.sty    2010/05/07  (rcs-revision 5584dad462a9)
beamerbasetitle.sty    2010/06/12  (rcs-revision 717e481ca47a)
beamerbasesection.sty    2010/06/17  (rcs-revision e0d9401bb743)
beamerbaseframe.sty    2010/06/06  (rcs-revision bff0a9294b45)
beamerbaseverbatim.sty    2010/05/01  (rcs-revision efa082c6111d)
beamerbaseframesize.sty    2010/06/27  (rcs-revision 6baa2d92e6f1)
beamerbaseframecomponents.sty    2010/07/12  (rcs-revision 09e82992d9b1)
beamerbasecolor.sty    2010/06/06  (rcs-revision d1a9b48be06d)
beamerbasenotes.sty    2010/05/01  (rcs-revision efa082c6111d)
beamerbasetoc.sty    2010/06/11  (rcs-revision 242ecaa6783b)
beamerbasetemplates.sty    2010/05/01  (rcs-revision efa082c6111d)
beamerbaseauxtemplates.sty    2010/05/01  (rcs-revision efa082c6111d)
beamerbaseboxes.sty    2010/05/01  (rcs-revision efa082c6111d)
beamerbaselocalstructure.sty    2010/06/01  (rcs-revision 81f9e33f7cc2)
enumerate.sty    1999/03/05 v3.00 enumerate extensions (DPC)
beamerbasenavigation.sty    2010/05/01  (rcs-revision efa082c6111d)
beamerbasetheorems.sty    2010/06/06  (rcs-revision 7e7cc5e53e9d)
 amsmath.sty    2000/07/18 v2.13 AMS math features
 amstext.sty    2000/06/29 v2.01
  amsgen.sty    1999/11/30 v2.0
  amsbsy.sty    1999/11/29 v1.2d
  amsopn.sty    1999/12/14 v2.01 operator names
  amsthm.sty    2004/08/06 v2.20
beamerbasethemes.sty    2010/05/01  (rcs-revision efa082c6111d)
beamerthemedefault.sty    2010/06/17  (rcs-revision d02a7cf4d8ae)
beamerfontthemedefault.sty    2010/06/17  (rcs-revision d02a7cf4d8ae)
beamercolorthemedefault.sty    2010/06/17  (rcs-revision d02a7cf4d8ae)
beamerinnerthemedefault.sty    2010/06/17  (rcs-revision d02a7cf4d8ae)
beamerouterthemedefault.sty    2010/06/17  (rcs-revision d02a7cf4d8ae)
inputenc.sty    2008/03/30 v1.1d Input encoding file
  latin1.def    2008/03/30 v1.1d Input encoding file
beamerthemeWarsaw.sty    2010/06/17  (rcs-revision d02a7cf4d8ae)
beamerinnerthemerounded.sty    2010/06/17  (rcs-revision d02a7cf4d8ae)
beamerouterthemeshadow.sty    2010/06/17  (rcs-revision d02a7cf4d8ae)
beamerouterthemesplit.sty    2010/06/17  (rcs-revision d02a7cf4d8ae)
beamercolorthemeorchid.sty    2010/06/17  (rcs-revision d02a7cf4d8ae)
beamercolorthemewhale.sty    2010/06/17  (rcs-revision d02a7cf4d8ae)
supp-pdf.mkii
epstopdf-base.sty    2010/02/09 v2.5 Base part for package epstopdf
  grfext.sty    2007/09/30 v1.0 Managing graphics extensions (HO)
epstopdf-sys.cfg    2010/07/13 v1.3 Configuration of (r)epstopdf for TeX Live
 nameref.sty    2010/04/30 v2.40 Cross-referencing by name of section
refcount.sty    2008/08/11 v3.1 Data extraction from references (HO)
gettitlestring.sty    2009/12/18 v1.3 Cleanup title references (HO)
  Test-4.out
  Test-4.out
translator-basic-dictionary-English.dict    
translator-bibliography-dictionary-English.dict    
translator-environment-dictionary-English.dict    
translator-months-dictionary-English.dict    
translator-numbers-dictionary-English.dict    
translator-theorem-dictionary-English.dict    
 ***********

[u_fischer]

Das ist irgendein Problem mit der neuesten hyperref Version. Einfach mal abwarten, das wird sicherlich schnell gelöst. In der Zwischenzeit kannst du versuchen die Fehlermeldung so zu vermeiden:

\documentclass{beamer}
\makeatletter
\def\Hy@xspace@end{}
\makeatother
\begin{document}
abc
\end{document}

(In der Hoffnung, dass deswegen nichts anderes explodiert).

[brainybrown]

Vielen Dank für die Antworten und sorry für die späte Rückmeldung.
@u_fischer: Jo super. Ich will zwar nicht den Tag vor dem Abend loben, aber es scheint zu funzen.