Hi, ich bin auch schon seit längerem mit pstricks am rumprobieren, hab aber ziemliche Probleme.
Darum hab ich jetzt mal das Bsp von Herbert hergenommen zum schauen ob ich zu blöd bin und es scheint so :-(
Der versuchte Code:
Code:
\listfiles
\documentclass{article}
\usepackage{pst-circ}
\begin{document}
\begin{pspicture}(0,0)(7,7)
\pnode(2,3){A}
\pnode(2,6){B}
\resistor(A)(B){$R$}
\end{pspicture}
\end{document}
Wenn ich des ganze als DVI file generiere funktioniert es mit 0 Fehlern, 0 Warnungen,...
und der YAP fragt mich folgendes:
Code:
The document cannot be rendered properly because the current render method does not support PostScript specials.
Temporarily switch to the Dvips render method?
Wenn ich das mit Ja bestätige, klappt alles wunderbar...
Wenn ich allerdings Latex -> Pdf auswähle, kommen lauter Fehlermeldungen:
Das Latex Log-File dazu:
Code:
This is pdfeTeX, Version 3.141592-1.30.6-2.2 (MiKTeX 2.5) (preloaded format=latex 2007.2.28) 20 MAR 2007 00:08
entering extended mode
**LaTeX2.tex
(LaTeX2.tex
LaTeX2e <2005/12/01>
Babel and hyphenation patterns for english, dumylang, nohyphenation, ge
rman, ngerman, french, loaded.
("C:\Programme\MiKTeX 2.5\tex\latex\base\article.cls"
Document Class: article 2005/09/16 v1.4f Standard LaTeX document class
("C:\Programme\MiKTeX 2.5\tex\latex\base\size10.clo"
File: size10.clo 2005/09/16 v1.4f Standard LaTeX file (size option)
)
\c@part=\count79
\c@section=\count80
\c@subsection=\count81
\c@subsubsection=\count82
\c@paragraph=\count83
\c@subparagraph=\count84
\c@figure=\count85
\c@table=\count86
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
)
("C:\Programme\MiKTeX 2.5\tex\latex\pst-circ\pst-circ.sty"
("C:\Programme\MiKTeX 2.5\tex\latex\pstricks\pstricks.sty"
Package: pstricks 2006/08/10 v0.32 LaTeX wrapper for `PSTricks' (RN,HV)
("C:\Programme\MiKTeX 2.5\tex\generic\pstricks\pstricks.tex"
`PSTricks' v1.15 <2006/12/22> (tvz)
\pst@dima=\dimen103
\pst@dimb=\dimen104
\pst@dimc=\dimen105
\pst@dimd=\dimen106
\pst@dimg=\dimen107
\pst@dimh=\dimen108
\pst@hbox=\box26
\pst@boxg=\box27
\pst@cnta=\count87
\pst@cntb=\count88
\pst@cntc=\count89
\pst@cntd=\count90
\pst@cntg=\count91
\pst@cnth=\count92
\pst@toks=\toks14
("C:\Programme\MiKTeX 2.5\tex\generic\pstricks\pstricks.con")
\psunit=\dimen109
\psxunit=\dimen110
\psyunit=\dimen111
\pslinewidth=\dimen112
\pst@customdefs=\toks15
\pslinearc=\dimen113
\everypsbox=\toks16
\psframesep=\dimen114
\pslabelsep=\dimen115
\psk@shift=\dimen116
\pst@shift=\dimen117
\theoverlaybox=\box28
)
File: pstricks.tex 2006/12/22 v1.15 `PSTricks' (tvz)
("C:\Programme\MiKTeX 2.5\tex\latex\xcolor\xcolor.sty"
Package: xcolor 2007/01/21 v2.11 LaTeX color extensions (UK)
("C:\Programme\MiKTeX 2.5\tex\latex\00miktex\color.cfg"
File: color.cfg 2005/12/29 v1.1 MiKTeX 'color' configuration
)
Package xcolor Info: Package option `override' ignored on input line 216.
Package xcolor Info: Driver file: dvips.def on input line 225.
("C:\Programme\MiKTeX 2.5\tex\latex\graphics\dvips.def"
File: dvips.def 1999/02/16 v3.0i Driver-dependant file (DPC,SPQR)
)
Package xcolor Info: Model `cmy' substituted by `cmy0' on input line 1337.
Package xcolor Info: Model `RGB' extended on input line 1353.
Package xcolor Info: Model `HTML' substituted by `rgb' on input line 1355.
Package xcolor Info: Model `Hsb' substituted by `hsb' on input line 1356.
Package xcolor Info: Model `tHsb' substituted by `hsb' on input line 1357.
Package xcolor Info: Model `HSB' substituted by `hsb' on input line 1358.
Package xcolor Info: Model `Gray' substituted by `gray' on input line 1359.
Package xcolor Info: Model `wave' substituted by `hsb' on input line 1360.
))
Package: pst-circ 2004/10/31 package wrapper for pst-circ.tex (hv)
("C:\Programme\MiKTeX 2.5\tex\generic\pst-circ\pst-circ.tex"
("C:\Programme\MiKTeX 2.5\tex\generic\multido\multido.tex"
v1.41, 2004/05/18
\multido@count=\count93
\multidocount=\count94
\multido@stuff=\toks17
)
("C:\Programme\MiKTeX 2.5\tex\generic\pstricks\pst-node.tex"
v97 patch 11, 2000/11/09
\psrow=\count95
\pscol=\count96
\psmatrixcnt=\count97
\psrowsep=\skip43
\pscolsep=\skip44
)
("C:\Programme\MiKTeX 2.5\tex\generic\xkeyval\pst-xkey.tex"
File: pst-xkey.tex 2005/11/25 v1.6 PSTricks specialization of xkeyval (HA)
("C:\Programme\MiKTeX 2.5\tex\latex\xkeyval\xkeyval.sty"
Package: xkeyval 2006/11/18 v2.5f package option processing (HA)
("C:\Programme\MiKTeX 2.5\tex\generic\xkeyval\xkeyval.tex"
\XKV@toks=\toks18
\XKV@depth=\count98
File: xkeyval.tex 2006/11/18 v2.5f key=value parser (HA)
("C:\Programme\MiKTeX 2.5\tex\generic\xkeyval\keyval.tex"))))
`pst-circ' v1.39(CJ,hv)
\Pst@position=\dimen118
\pst@count@i=\count99
\pst@count@ii=\count100
\pst@count@iii=\count101
\Pst@basesep=\dimen119
)
File: pst-circ.tex 2005/04/03 v1.39 `PST-circ' (CJ,hv)
) (LaTeX2.aux)
LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 5.
LaTeX Font Info: ... okay on input line 5.
LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 5.
LaTeX Font Info: ... okay on input line 5.
LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 5.
LaTeX Font Info: ... okay on input line 5.
LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 5.
LaTeX Font Info: ... okay on input line 5.
LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 5.
LaTeX Font Info: ... okay on input line 5.
LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 5.
LaTeX Font Info: ... okay on input line 5.
LaTeX Font Info: External font `cmex10' loaded for size
(Font) <7> on input line 9.
LaTeX Font Info: External font `cmex10' loaded for size
(Font) <5> on input line 9.
[1
] (LaTeX2.aux)
*File List*
article.cls 2005/09/16 v1.4f Standard LaTeX document class
size10.clo 2005/09/16 v1.4f Standard LaTeX file (size option)
pst-circ.sty 2004/10/31 package wrapper for pst-circ.tex (hv)
pstricks.sty 2006/08/10 v0.32 LaTeX wrapper for `PSTricks' (RN,HV)
pstricks.tex 2006/12/22 v1.15 `PSTricks' (tvz)
xcolor.sty 2007/01/21 v2.11 LaTeX color extensions (UK)
color.cfg 2005/12/29 v1.1 MiKTeX 'color' configuration
dvips.def 1999/02/16 v3.0i Driver-dependant file (DPC,SPQR)
pst-circ.tex 2005/04/03 v1.39 `PST-circ' (CJ,hv)
pst-xkey.tex 2005/11/25 v1.6 PSTricks specialization of xkeyval (HA)
xkeyval.sty 2006/11/18 v2.5f package option processing (HA)
xkeyval.tex 2006/11/18 v2.5f key=value parser (HA)
***********
)
Here is how much of TeX's memory you used:
2711 strings out of 95420
32553 string characters out of 1187424
122074 words of memory out of 1125774
5862 multiletter control sequences out of 60000
3640 words of font info for 14 fonts, out of 1000000 for 2000
14 hyphenation exceptions out of 8191
37i,5n,40p,226b,290s stack positions out of 5000i,500n,10000p,200000b,32768s
Output written on LaTeX2.dvi (1 page, 4504 bytes).
Liegt es an mir, oder kann ich generell kein PDF daraus generieren?
Vielleicht hat jemand eine Idee?
Vielen Dank für eure Hilfe schon im voraus
lg markus
Lesezeichen