apa-Stil und biber: Bibliographie bleibt leer

Hallo,
ich möchte den apa-Style und entsprechend biber als backend nutzen, doch meine Bibliographie bleibt leer. Nun habe ich schon mehrere Antworten zu dem offensichtlich nicht zum ersten Mal auftauchenden Problem gesehen. Auch wenn ich schon einiges geändert -- und dabei hoffentlich einige Fehler eleminiert habe --, so will das Ganze doch nicht so recht laufen. Wahrscheinlich betriebsblind...

Hier, als Minimalbeispiel, was in der Datei steht:

Code:

---

\documentclass[fontsize=10bp,a4paper,titlepage,DIV=11]{scrartcl}
\renewcommand{\familydefault}{\sfdefault}
\usepackage[utf8]{inputenc}
\usepackage[OT1]{fontenc}
\usepackage[ngerman,german]{babel}
\usepackage{array}
\newcolumntype{R}[1]{>{\raggedleft}p{#1}}
\usepackage{hyperref}
%\usepackage{natbib}
%\bibliographystyle{plainnat}

\usepackage[style=apa,backend=biber,hyperref=true,natbib=true,uniquename=false,hyperref,maxbibnames=10]{biblatex}
%\bibliography{./Bibliography_Verl}
\DeclareLanguageMapping{ngerman}{ngerman-apa}
\defbibheading{head}{\section{Literaturverzeichnis}}
\addbibresource{Bibliography_Verl.bib}
\usepackage[autostyle,german=guillemets,english=british,french=guillemets]{csquotes}

\begin{document}

\subsubsection*{Schwieriges Modell}
Bla-bla und noch mehr bla \textcite{andersen1995}!

\printbibliography[heading=head]

\end{document}

---

Der aufgerufene Key liegt in der Datei Bibliography_Verl.bib im selben Verzeichnis. Lasse ich das Ganze fünfmal durchlaufen, so ist auch genau dieser Eintrag an die *.bbl-Datei übergeben worden, in der *.aux-Datei taucht andersen jedoch nicht mehr auf. Entsprechend erhalte ich weiterhin die Meldung "Citation andersen1995 on page 1 undefined on input line 22" und die Bibliographie im erstellten Dokument bleibt leer.

Habe ich irgendeinen Tippfehler übersehen? Fehlt noch eine Anpassung? Oder liegt es an der "Zusammenarbeit" zwischen TeXnicCenter und BibLaTeX?

Herzlichen Dank schon einmal für die Hilfe!

Rufst du denn biber überhaupt auf?

Biber wird durch TeXnicCenter (C:\Programme\MikTeX2.9\miktex\bin\biber.exe; "%tm") aufgerufen und präsentiert sich nach einem Durchlauf durch "This is Biber 0.9.8", während es zeitgleich die entsprechenden Hilfsdateien anlegt. Von daher scheint das zu funktionieren. Außerdem sagt mir die *.log-Datei, dass die apa-Style-Datei offensichtlich auch gefunden wurde. Oder gibt es eine genauere Möglichkeit, nachzuprüfen, ob biber tatsächlich tätig wird?

Zitat:

---

Oder gibt es eine genauere Möglichkeit, nachzuprüfen, ob biber tatsächlich tätig wird?

---

Du musst halt mal in die .blg-Datei schauen.

Abgesehen davon solltest du deine Sprachen mal sortieren. ngerman + german zu nutzen, kann nur zur Verwirrung führen.

Das meint *.blg-Datei, was das gleiche ist wie das, was mir auch am Ende der Kompilierung ausgegeben wird:

Code:

---

[1] Config.pm:300> INFO - This is Biber 0.9.8
[1] Config.pm:303> INFO - Logfile is 'Tescht.blg'
[4] biber-MSWIN:131> INFO - === Do Aug , 2012, 16:28:29
[5] Biber.pm:271> INFO - Reading 'Tescht.bcf'
[49] Biber.pm:586> INFO - Found 1 citekeys in bib section 0
[77] Biber.pm:2583> INFO - Processing bib section 0
[136] Biber.pm:2675> INFO - Looking for bibtex format file 'Bibliography_Verl.bib' for section 0
[151] bibtex.pm:819> INFO - Decoding LaTeX character macros into UTF-8
[244] bibtex.pm:823> INFO - Finished Decoding LaTeX character macros into UTF-8
[245] bibtex.pm:689> INFO - Found BibTeX data source 'Bibliography_Verl.bib'
[303] Utils.pm:168> WARN - BibTeX subsystem: C:\DOKUME~1\Saller\LOKALE~1\Temp\yw1TV5IclD\Bibliography_Verl.bib_3352.utf8, line 1349, warning: possible runaway string started at line 1348
[412] Biber.pm:2478> INFO - Sorting list 'MAIN' keys
[412] Biber.pm:2482> INFO - No sort tailoring available for locale 'English_United States.1252'
[442] Biber.pm:2478> INFO - Sorting list 'SHORTHANDS' keys
[442] Biber.pm:2482> INFO - No sort tailoring available for locale 'English_United States.1252'
[467] bbl.pm:427> INFO - Writing 'Tescht.bbl' with encoding 'UTF-8'
[468] bbl.pm:498> INFO - Output to Tescht.bbl
[468] Biber.pm:106> INFO - WARNINGS: 1

---

Danach scheint mir sowohl meine Bibliographie erkannt worden zu sein als auch Biber zu laufen, oder?

Ich habe 'german' jetzt testeshalber 'mal weggelassen, am Ergebnis ändert das auch nichts. Da wir außerdem mit mehreren Quellen unterschiedlicher Rechtschreibung arbeiten, ist das nötig, Wenn das schon zu Verwirrung führt, weiß ich nicht, was ich mit meinen mehrsprachigen Texten machen soll.

Zitat:

---

Da wir außerdem mit mehreren Quellen unterschiedlicher Rechtschreibung arbeiten, ist das nötig

---

Dann solltest du aber die zusätzlichen Sprachen für apa deklarieren. Es macht nicht viel Sinn, wenn es ein Mapping für ngerman gibt, aber die aktive Sprache german ist. Ich zumindest bekomme einfach Fehler.

Abgesehen davon funktioniert dein Beispiel bei mir, aber ich habe natürlich nicht deine bib-Datei.

Zeig mal bbl und deine log-Datei.

Hallo tjaenare,

wenn du apa benutzt, musst du dich meines Wissen auf eine Sprache festlegen. Du hast

Code:

---

\DeclareLanguageMapping{ngerman}{ngerman-apa}

---

angegeben, musst also auch

Code:

---

\usepackage[german,ngerman]{babel}

---

einsetzen.

Ohne Garantie, weil ich keine Windosen verwende.

Viel Erfolg

Gruß und willkommen im Forum

Martin

log-Datei:

Code:

---

This is pdfTeX, Version 3.1415926-2.3-1.40.12 (MiKTeX 2.9) (preloaded format=pdflatex 2012.7.16)  16 AUG 2012 17:01
entering extended mode
**Tescht.tex
(D:\OvGU\Verlängerung\DFG_AntrVerl\Tescht.tex
LaTeX2e <2011/06/27>

[BABEL & KOMA-Skript output gekürzt, da zu lang für Posting]


[Encoding-Definitionen gekürzt, da Posting sonst zu lang]


*************************************
* Local config file bblopts.cfg used
*
(C:\Programme\MikTeX2.9\tex\latex\00miktex\bblopts.cfg
File: bblopts.cfg 2006/07/31 v1.0 MiKTeX 'babel' configuration
) (C:\Programme\MikTeX2.9\tex\generic\babel\germanb.ldf
Language: germanb 2008/06/01 v2.6m German support from the babel system

(C:\Programme\MikTeX2.9\tex\generic\babel\babel.def
File: babel.def 2008/07/08 v3.8m Babel common definitions
\babel@savecnt=\count88
\U@D=\dimen103
)
\l@austrian = a dialect from \language\l@german
Package babel Info: Making " an active character on input line 102.
) (C:\Programme\MikTeX2.9\tex\generic\babel\ngermanb.ldf
Language: ngermanb 2008/07/06 v2.6n new German support from the babel system
\l@naustrian = a dialect from \language\l@ngerman
))
(C:\Programme\MikTeX2.9\tex\latex\tools\array.sty
Package: array 2008/09/09 v2.4c Tabular extension package (FMi)
\col@sep=\dimen104
\extrarowheight=\dimen105
\NC@list=\toks17
\extratabsurround=\skip47
\backup@length=\skip48
) (C:\Programme\MikTeX2.9\tex\latex\hyperref\hyperref.sty
Package: hyperref 2011/12/04 v6.82m Hypertext links for LaTeX

(C:\Programme\MikTeX2.9\tex\generic\oberdiek\hobsub-hyperref.sty
Package: hobsub-hyperref 2011/04/23 v1.4 Bundle oberdiek, subset hyperref (HO)

(C:\Programme\MikTeX2.9\tex\generic\oberdiek\hobsub-generic.sty
Package: hobsub-generic 2011/04/23 v1.4 Bundle oberdiek, subset generic (HO)
Package: hobsub 2011/04/23 v1.4 Subsetting bundle oberdiek (HO)
Package: infwarerr 2010/04/08 v1.3 Providing info/warning/message (HO)
Package: ltxcmds 2011/04/18 v1.20 LaTeX kernel commands for general use (HO)
Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO)
Package ifluatex Info: LuaTeX not detected.
Package: ifvtex 2010/03/01 v1.5 Switches for detecting VTeX and its modes (HO)
Package ifvtex Info: VTeX not detected.
Package: intcalc 2007/09/27 v1.1 Expandable integer calculations (HO)
Package: ifpdf 2011/01/30 v2.3 Provides the ifpdf switch (HO)
Package ifpdf Info: pdfTeX in PDF mode is detected.
Package: etexcmds 2011/02/16 v1.5 Prefix for e-TeX command names (HO)
Package etexcmds Info: Could not find \expanded.
(etexcmds)            That can mean that you are not using pdfTeX 1.50 or
(etexcmds)            that some package has redefined \expanded.
(etexcmds)            In the latter case, load this package earlier.
Package: kvsetkeys 2011/04/07 v1.13 Key value parser (HO)
Package: kvdefinekeys 2011/04/07 v1.3 Defining keys (HO)
Package: pdftexcmds 2011/04/22 v0.16 Utilities of pdfTeX for LuaTeX (HO)
Package pdftexcmds Info: LuaTeX not detected.
Package pdftexcmds Info: \pdf@primitive is available.
Package pdftexcmds Info: \pdf@ifprimitive is available.
Package pdftexcmds Info: \pdfdraftmode found.
Package: pdfescape 2011/04/04 v1.12 Provides string conversions (HO)
Package: bigintcalc 2011/01/30 v1.2 Expandable big integer calculations (HO)
Package: bitset 2011/01/30 v1.1 Data type bit set (HO)
Package: uniquecounter 2011/01/30 v1.2 Provides unlimited unique counter (HO)
)
Package hobsub Info: Skipping package `hobsub' (already loaded).
Package: letltxmacro 2010/09/02 v1.4 Let assignment for LaTeX macros (HO)
Package: hopatch 2011/01/30 v1.0 Wrapper for package hooks (HO)
Package: xcolor-patch 2011/01/30 xcolor patch
Package: atveryend 2011/04/23 v1.7 Hooks at very end of document (HO)
Package: atbegshi 2011/01/30 v1.15 At begin shipout hook (HO)
Package: refcount 2010/12/01 v3.2 Data extraction from references (HO)
Package: hycolor 2011/01/30 v1.7 Color options of hyperref/bookmark (HO)
)
(C:\Programme\MikTeX2.9\tex\generic\ifxetex\ifxetex.sty
Package: ifxetex 2010/09/12 v0.6 Provides ifxetex conditional
) (C:\Programme\MikTeX2.9\tex\latex\oberdiek\kvoptions.sty
Package: kvoptions 2010/12/23 v3.10 Keyval support for LaTeX options (HO)
)
\@linkdim=\dimen106
\Hy@linkcounter=\count89
\Hy@pagecounter=\count90


[hyperref output gekürzt, da zu lang für Posting]


\Fld@listcount=\count97
\c@bookmark@seq@number=\count98
 (C:\Programme\MikTeX2.9\tex\latex\oberdiek\rerunfilecheck.sty
Package: rerunfilecheck 2011/04/15 v1.7 Rerun checks for auxiliary files (HO)
Package uniquecounter Info: New unique counter `rerunfilecheck' on input line 282.
)
\Hy@SectionHShift=\skip49
)
(C:\Programme\MikTeX2.9\tex\latex\biblatex\biblatex.sty
Package: biblatex 2011/11/13 v1.7 programmable bibliographies
 (C:\Programme\MikTeX2.9\tex\latex\etoolbox\etoolbox.sty
Package: etoolbox 2011/01/03 v2.1 e-TeX tools for LaTeX

(C:\Programme\MikTeX2.9\tex\latex\misc\etex.sty
Package: etex 1998/03/26 v2.0 eTeX basic definition package (PEB)
\et@xins=\count99
)
\etb@tempcnta=\count100
) (C:\Programme\MikTeX2.9\tex\latex\logreq\logreq.sty
Package: logreq 2010/08/04 v1.0 xml request logger
\lrq@indent=\count101

(C:\Programme\MikTeX2.9\tex\latex\logreq\logreq.def
File: logreq.def 2010/08/04 v1.0 logreq spec v1.0
)) (C:\Programme\MikTeX2.9\tex\latex\base\ifthen.sty
Package: ifthen 2001/05/26 v1.1c Standard LaTeX ifthen package (DPC)
)
\c@listtotal=\count102
\c@listcount=\count103
\c@liststart=\count104
\c@liststop=\count105
\c@citecount=\count106
\c@citetotal=\count107
\c@multicitecount=\count108
\c@multicitetotal=\count109
\c@instcount=\count110
\c@maxnames=\count111
\c@minnames=\count112
\c@maxitems=\count113
\c@minitems=\count114
\c@citecounter=\count115
\c@savedcitecounter=\count116
\c@uniquelist=\count117
\c@uniquename=\count118
\c@refsection=\count119
\c@refsegment=\count120
\c@maxextrayear=\count121
\c@maxextraalpha=\count122
\c@abbrvpenalty=\count123
\c@highnamepenalty=\count124
\c@lownamepenalty=\count125
\c@maxparens=\count126
\c@parenlevel=\count127
\blx@tempcnta=\count128
\blx@tempcntb=\count129
\blx@tempcntc=\count130
\blx@maxsection=\count131
\blx@maxsegment=\count132
\blx@notetype=\count133
\blx@parenlevel@text=\count134
\blx@parenlevel@foot=\count135
\labelnumberwidth=\skip50
\labelalphawidth=\skip51
\shorthandwidth=\skip52
\biblabelsep=\skip53
\bibitemsep=\skip54
\bibnamesep=\skip55
\bibinitsep=\skip56
\bibparsep=\skip57
\bibhang=\skip58
\blx@auxin=\read1
\blx@auxout=\write3
\c@mincomprange=\count136
\c@maxcomprange=\count137
\c@mincompwidth=\count138
\c@labelname=\count139
\c@savedlabelname=\count140
\c@author=\count141
\c@savedauthor=\count142
\c@shortauthor=\count143
\c@savedshortauthor=\count144
\c@editor=\count145
\c@savededitor=\count146
\c@editora=\count147
\c@savededitora=\count148
\c@editorb=\count149
\c@savededitorb=\count150
\c@editorc=\count151
\c@savededitorc=\count152
\c@shorteditor=\count153
\c@savedshorteditor=\count154
\c@bookauthor=\count155
\c@savedbookauthor=\count156
\c@translator=\count157
\c@savedtranslator=\count158
\c@annotator=\count159
\c@savedannotator=\count160
\c@commentator=\count161
\c@savedcommentator=\count162
\c@introduction=\count163
\c@savedintroduction=\count164
\c@foreword=\count165
\c@savedforeword=\count166
\c@afterword=\count167
\c@savedafterword=\count168
\c@holder=\count169
\c@savedholder=\count170
\c@namea=\count171
\c@savednamea=\count172
\c@nameb=\count173
\c@savednameb=\count174
\c@namec=\count175
\c@savednamec=\count176
\c@institution=\count177
\c@savedinstitution=\count178
\c@language=\count179
\c@savedlanguage=\count180
\c@location=\count181
\c@savedlocation=\count182
\c@organization=\count183
\c@savedorganization=\count184
\c@origlocation=\count185
\c@savedoriglocation=\count186
\c@origpublisher=\count187
\c@savedorigpublisher=\count188
\c@pageref=\count189
\c@savedpageref=\count190
\c@publisher=\count191
\c@savedpublisher=\count192
\c@lista=\count193
\c@savedlista=\count194
\c@listb=\count195
\c@savedlistb=\count196
\c@listc=\count197
\c@savedlistc=\count198
\c@listd=\count199
\c@savedlistd=\count200
\c@liste=\count201
\c@savedliste=\count202
\c@listf=\count203
\c@savedlistf=\count204
Package biblatex Info: Trying to load compatibility code...
Package biblatex Info: ... file 'blx-compat.def' found.

(C:\Programme\MikTeX2.9\tex\latex\biblatex\blx-compat.def
File: blx-compat.def 2011/11/13 v1.7 biblatex generic compatibility
)
Package biblatex Info: Trying to load generic definitions...
Package biblatex Info: ... file 'biblatex.def' found.
 (C:\Programme\MikTeX2.9\tex\latex\biblatex\biblatex.def
File: biblatex.def 2011/11/13 v1.7 biblatex generic definitions
\c@biburlnumpenalty=\count205
\c@biburlucpenalty=\count206
\c@biburllcpenalty=\count207
\c@smartand=\count208
)
Package biblatex Info: Trying to load natbib compatibility...
Package biblatex Info: ... file 'blx-natbib.def' found.

(C:\Programme\MikTeX2.9\tex\latex\biblatex\blx-natbib.def
File: blx-natbib.def 2011/11/13 v1.7 biblatex natbib compatibility
)
Package biblatex Info: Trying to load bibliography style 'apa'...
Package biblatex Info: ... file 'apa.bbx' found.
 (C:\Programme\MikTeX2.9\tex\latex\biblatex-apa\apa.bbx
File: apa.bbx 2012/07/01 v5.0 APA biblatex references style
Package biblatex Info: Trying to load bibliography style 'standard'...
Package biblatex Info: ... file 'standard.bbx' found.

(C:\Programme\MikTeX2.9\tex\latex\biblatex\bbx\standard.bbx
File: standard.bbx 2011/11/13 v1.7 biblatex bibliography style
)

Package biblatex Warning: Macro 'reviewauthor' undefined.
(biblatex)                Using \newbibmacro.

)
Package biblatex Info: Trying to load citation style 'apa'...
Package biblatex Info: ... file 'apa.cbx' found.
 (C:\Programme\MikTeX2.9\tex\latex\biblatex-apa\apa.cbx
File: apa.cbx 2012/07/01 5.0 APA biblatex citation style
Package biblatex Info: Redefining '\parencite'.
Package biblatex Info: Redefining '\fullcite'.
Package biblatex Info: Redefining '\citeyear'.
Package biblatex Info: Redefining '\cite'.
Package biblatex Info: Redefining '\footcite'.
Package biblatex Info: Redefining '\textcites'.
Package biblatex Info: Redefining '\textcite'.
Package biblatex Info: Redefining '\citeauthor'.
)
Package biblatex Info: Trying to load configuration file...
Package biblatex Info: ... file 'biblatex.cfg' found.
 (C:\Programme\MikTeX2.9\tex\latex\biblatex\biblatex.cfg
File: biblatex.cfg
))
(C:\Programme\MikTeX2.9\tex\latex\csquotes\csquotes.sty
Package: csquotes 2011/10/22 v5.1d context-sensitive quotations
\csq@reset=\count209
\csq@gtype=\count210
\csq@glevel=\count211
\csq@qlevel=\count212
\csq@maxlvl=\count213
\csq@tshold=\count214
\csq@ltx@everypar=\toks18
 (C:\Programme\MikTeX2.9\tex\latex\csquotes\csquotes.def
File: csquotes.def 2011/10/22 v5.1d csquotes generic definitions
)
Package csquotes Info: Trying to load configuration file 'csquotes.cfg'...
Package csquotes Info: ... configuration file loaded successfully.

(C:\Programme\MikTeX2.9\tex\latex\csquotes\csquotes.cfg
File: csquotes.cfg
)
Package csquotes Info: Enabling multilingual quotes.
Package csquotes Info: Redefining alias 'german' -> 'german/guillemets'.
Package csquotes Info: Redefining alias 'english' -> 'english/british'.
Package csquotes Info: Redefining alias 'french' -> 'french/guillemets'.
)
Package biblatex Info: Trying to load language 'ngerman' -> 'ngerman-apa'...
Package biblatex Info: ... file 'ngerman-apa.lbx' found.
 (C:\Programme\MikTeX2.9\tex\latex\biblatex-apa\ngerman-apa.lbx
File: ngerman-apa.lbx 2012/07/01 v5.0 APA biblatex localisation
Package biblatex Info: Trying to load language 'ngerman'...
Package biblatex Info: ... file 'ngerman.lbx' found.
(C:\Programme\MikTeX2.9\tex\latex\biblatex\lbx\ngerman.lbx
File: ngerman.lbx 2011/11/13 v1.7 biblatex localization
Package biblatex Info: Trying to load language 'german'...
Package biblatex Info: ... file 'german.lbx' found.
 (C:\Programme\MikTeX2.9\tex\latex\biblatex\lbx\german.lbx
File: german.lbx 2011/11/13 v1.7 biblatex localization
)))
Package csquotes Info: Checking for multilingual support...
Package csquotes Info: ... found 'babel' package.

(D:\OvGU\Verlängerung\DFG_AntrVerl\Tescht.aux)


[font info gekürzt, da sonst zu lang für Posting]


\AtBeginShipoutBox=\box27
Package hyperref Info: Link coloring OFF on input line 19.
 (C:\Programme\MikTeX2.9\tex\latex\hyperref\nameref.sty
Package: nameref 2010/04/30 v2.40 Cross-referencing by name of section

(C:\Programme\MikTeX2.9\tex\generic\oberdiek\gettitlestring.sty
Package: gettitlestring 2010/12/03 v1.4 Cleanup title references (HO)
)
\c@section@level=\count215
)
LaTeX Info: Redefining \ref on input line 19.
LaTeX Info: Redefining \pageref on input line 19.
LaTeX Info: Redefining \nameref on input line 19.
 (D:\OvGU\Verlängerung\DFG_AntrVerl\Tescht.out)
(D:\OvGU\Verlängerung\DFG_AntrVerl\Tescht.out)
\@outlinefile=\write4
Package biblatex Info: Input encoding 'utf8' detected.
Package biblatex Info: Automatic encoding selection.
(biblatex)            Assuming data encoding 'utf8'.
Package biblatex Info: Reference section=0 on input line 19.
Package biblatex Info: Reference segment=0 on input line 19.


LaTeX Warning: Citation 'andersen1995' on page 1 undefined on input line 22.


LaTeX Warning: Empty bibliography on input line 24.

Package atveryend Info: Empty hook `BeforeClearDocument' on input line 26.
[1

{C:/Dokumente und Einstellungen/Saller/Lokale Einstellungen/Anwendungsdaten/MiKTeX/2.9/pdftex/config/pdftex.map}]
Package atveryend Info: Empty hook `AfterLastShipout' on input line 26.

(D:\OvGU\Verlängerung\DFG_AntrVerl\Tescht.aux)
Package atveryend Info: Executing hook `AtVeryEndDocument' on input line 26.
Package atveryend Info: Executing hook `AtEndAfterFileList' on input line 26.
Package rerunfilecheck Info: File `Tescht.out' has not changed.
(rerunfilecheck)            Checksum: D41D8CD98F00B204E9800998ECF8427E;0.


LaTeX Warning: There were undefined references.


Package biblatex Warning: Please (re)run Biber on the file:
(biblatex)                Tescht
(biblatex)                and rerun LaTeX afterwards.

Package logreq Info: Writing requests to 'Tescht.run.xml'.
 )

[memory info gekürzt, da sonst zu lang für Posting]

---

Irgendwie habe ich den Eindruck, dass vielleicht alles erstellt, aber dann auf die falsche Datei zurückgegriffen wird...

@nixversteh:

Zitat:

---

Ohne Garantie, weil ich keine Windosen verwende.

---

Das scheint mir manchmal durchaus die wesentlich bessere Variante zu sein! :-)

bbl-Datei:

Code:

---

% $ biblatex auxiliary file $
% $ biblatex version 1.7 $
% $ biber version 0.9.8 $
% Do not modify the above lines!
%
% This is an auxiliary file used by the 'biblatex' package.
% This file may safely be deleted. It will be recreated by
% biber or bibtex as required.
%
\begingroup
\makeatletter
\@ifundefined{ver@biblatex.sty}
  {\@latex@error
    {Missing 'biblatex' package}
    {The bibliography requires the 'biblatex' package.}
      \aftergroup\endinput}
  {}
\endgroup


\refsection{0}
  \entry{andersen1995}{article}{}
    \name{labelname}{1}{}{%
      {{hash=1d99860e99bf7a29e2cd8490f6489e09}{Andersen}{A\bibinitperiod}{Ronald\bibnamedelima M.}{R\bibinitperiod\bibinitdelim M\bibinitperiod}{}{}{}{}}%
    }
    \name{author}{1}{}{%
      {{hash=1d99860e99bf7a29e2cd8490f6489e09}{Andersen}{A\bibinitperiod}{Ronald\bibnamedelima M.}{R\bibinitperiod\bibinitdelim M\bibinitperiod}{}{}{}{}}%
    }
    \strng{namehash}{1d99860e99bf7a29e2cd8490f6489e09}
    \strng{fullhash}{1d99860e99bf7a29e2cd8490f6489e09}
    \field{sortinit}{A}
    \field{labelyear}{1995}
    \field{journaltitle}{Journal of Health and Social Behavior}
    \field{month}{03}
    \field{number}{1}
    \field{title}{{Revisiting the Behavioral Model and Access to Medical Care: Does It Matter?}}
    \field{volume}{36}
    \field{year}{1995}
    \field{pages}{1\bibrangedash 10}
  \endentry

\endrefsection
\endinput

---

Hallo tjaenare,

hast du meinen Code eingesetzt? Was passiert?
Unter Linux und Texlive 2012 und Kile getestet.
Gruß
Martin

Eine vollständige log-Datei wäre besser gewesen, da ist es einfacher ein diff zu machen. Außerdem wüsste man, ob biblatex wirklich nicht nach der bbl sucht.

Abgesehen davon: Du hast deutlich ältere Paketversionen als ich.

Zitat:

---

Zitat von u_fischer

Eine vollständige log-Datei wäre besser gewesen, da ist es einfacher ein diff zu machen. Außerdem wüsste man, ob biblatex wirklich nicht nach der bbl sucht.

---

Wenn es hilft, dann die vollständige log-Datei in zwei Schritten (wg. Zeichenbegrenzung auf 15.000 Zeichen):

Teil 1:

Code:

---

This is pdfTeX, Version 3.1415926-2.3-1.40.12 (MiKTeX 2.9) (preloaded format=pdflatex 2012.7.16)  16 AUG 2012 17:43
entering extended mode
**Tescht.tex
(D:\OvGU\Verlängerung\DFG_AntrVerl\Tescht.tex
LaTeX2e <2011/06/27>
Babel <v3.8m> and hyphenation patterns for english, afrikaans, ancientgreek, arabic, armenian, assamese, basque, bengali
, bokmal, bulgarian, catalan, coptic, croatian, czech, danish, dutch, esperanto, estonian, farsi, finnish, french, galic
ian, german, german-x-2009-06-19, greek, gujarati, hindi, hungarian, icelandic, indonesian, interlingua, irish, italian,
 kannada, kurmanji, lao, latin, latvian, lithuanian, malayalam, marathi, mongolian, mongolianlmc, monogreek, ngerman, ng
erman-x-2009-06-19, nynorsk, oriya, panjabi, pinyin, polish, portuguese, romanian, russian, sanskrit, serbian, slovak, s
lovenian, spanish, swedish, swissgerman, tamil, telugu, turkish, turkmen, ukenglish, ukrainian, uppersorbian, usenglishm
ax, welsh, loaded.
(C:\Programme\MikTeX2.9\tex\latex\koma-script\scrartcl.cls
Document Class: scrartcl 2011/06/16 v3.09a KOMA-Script document class (article)
(C:\Programme\MikTeX2.9\tex\latex\koma-script\scrkbase.sty
Package: scrkbase 2011/06/16 v3.09a KOMA-Script package (KOMA-Script-dependent basics and keyval usage)
 (C:\Programme\MikTeX2.9\tex\latex\koma-script\scrbase.sty
Package: scrbase 2011/06/16 v3.09a KOMA-Script package (KOMA-Script-independent basics and keyval usage)

(C:\Programme\MikTeX2.9\tex\latex\graphics\keyval.sty
Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
\KV@toks@=\toks14
) (C:\Programme\MikTeX2.9\tex\latex\koma-script\scrlfile.sty
Package: scrlfile 2011/03/09 v3.09 KOMA-Script package (loading files)

Package scrlfile, 2011/03/09 v3.09 KOMA-Script package (loading files)
                  Copyright (C) Markus Kohm

))) (C:\Programme\MikTeX2.9\tex\latex\koma-script\tocbasic.sty
Package: tocbasic 2011/05/30 v3.09a KOMA-Script package (handling toc-files)
)
Package tocbasic Info: omitting babel extension for `toc'
(tocbasic)            because of feature `nobabel' available
(tocbasic)            for `toc' on input line 115.
Package tocbasic Info: omitting babel extension for `lof'
(tocbasic)            because of feature `nobabel' available
(tocbasic)            for `lof' on input line 116.
Package tocbasic Info: omitting babel extension for `lot'
(tocbasic)            because of feature `nobabel' available
(tocbasic)            for `lot' on input line 117.


Class scrartcl Warning: Using fallback calculation to setup font sizes
(scrartcl)              for basic size `10bp' on input line 1247.

(C:\Programme\MikTeX2.9\tex\latex\koma-script\typearea.sty
Package: typearea 2011/06/16 v3.09a KOMA-Script package (type area)

Package typearea, 2011/06/16 v3.09a KOMA-Script package (type area)
                  Copyright (C) Frank Neukam, 1992-1994
                  Copyright (C) Markus Kohm, 1994-

\ta@bcor=\skip41
\ta@div=\count79
Package typearea Info: You've used standard option `a4paper'.
(typearea)            This is correct!
(typearea)            Internally I'm using `paper=a4'.
(typearea)            If you'd like to set the option with \KOMAoptions,
(typearea)            you'd have to use `paper=a4' there
(typearea)            instead of `a4paper', too.
\ta@hblk=\skip42
\ta@vblk=\skip43
\ta@temp=\skip44

Package typearea Warning: Bad type area settings!
(typearea)                The detected line width is about 21%
(typearea)                larger than the heuristically detected line width.
(typearea)                You should e.g. decrease DIV, increase fontsize
(typearea)                or change papersize.

Package typearea Info: These are the values describing the layout:
(typearea)            DIV  = 11
(typearea)            BCOR = 0.0pt
(typearea)            \paperwidth      = 597.50793pt
(typearea)              \textwidth      = 434.55125pt
(typearea)              DIV departure  = -21%
(typearea)              \evensidemargin = 9.20834pt
(typearea)              \oddsidemargin  = 9.20834pt
(typearea)            \paperheight    = 845.04694pt
(typearea)              \textheight    = 624.33006pt
(typearea)              \topmargin      = -28.57115pt
(typearea)              \headheight    = 15.05618pt
(typearea)              \headsep        = 18.06743pt
(typearea)              \topskip        = 10.03749pt
(typearea)              \footskip      = 42.15733pt
(typearea)              \baselineskip  = 12.04495pt
(typearea)              on input line 1139.
)
\c@part=\count80
\c@section=\count81
\c@subsection=\count82
\c@subsubsection=\count83
\c@paragraph=\count84
\c@subparagraph=\count85
\abovecaptionskip=\skip45
\belowcaptionskip=\skip46
\c@pti@nb@sid@b@x=\box26
\c@figure=\count86
\c@table=\count87
\bibindent=\dimen102
) (C:\Programme\MikTeX2.9\tex\latex\base\inputenc.sty
Package: inputenc 2008/03/30 v1.1d Input encoding file
\inpenc@prehook=\toks15
\inpenc@posthook=\toks16
 (C:\Programme\MikTeX2.9\tex\latex\base\utf8.def
File: utf8.def 2008/04/05 v1.1m UTF-8 support for inputenc
Now handling font encoding OML ...
... no UTF-8 mapping file for font encoding OML
Now handling font encoding T1 ...
... processing UTF-8 mapping file for font encoding T1

(C:\Programme\MikTeX2.9\tex\latex\base\t1enc.dfu
File: t1enc.dfu 2008/04/05 v1.1m UTF-8 support for inputenc
  defining Unicode char U+00A1 (decimal 161)
  defining Unicode char U+00A3 (decimal 163)
  defining Unicode char U+00AB (decimal 171)
  defining Unicode char U+00BB (decimal 187)
  defining Unicode char U+00BF (decimal 191)
  defining Unicode char U+00C0 (decimal 192)
  defining Unicode char U+00C1 (decimal 193)
  defining Unicode char U+00C2 (decimal 194)
  defining Unicode char U+00C3 (decimal 195)
  defining Unicode char U+00C4 (decimal 196)
  defining Unicode char U+00C5 (decimal 197)
  defining Unicode char U+00C6 (decimal 198)
  defining Unicode char U+00C7 (decimal 199)
  defining Unicode char U+00C8 (decimal 200)
  defining Unicode char U+00C9 (decimal 201)
  defining Unicode char U+00CA (decimal 202)
  defining Unicode char U+00CB (decimal 203)
  defining Unicode char U+00CC (decimal 204)
  defining Unicode char U+00CD (decimal 205)
  defining Unicode char U+00CE (decimal 206)
  defining Unicode char U+00CF (decimal 207)
  defining Unicode char U+00D0 (decimal 208)
  defining Unicode char U+00D1 (decimal 209)
  defining Unicode char U+00D2 (decimal 210)
  defining Unicode char U+00D3 (decimal 211)
  defining Unicode char U+00D4 (decimal 212)
  defining Unicode char U+00D5 (decimal 213)
  defining Unicode char U+00D6 (decimal 214)
  defining Unicode char U+00D8 (decimal 216)
  defining Unicode char U+00D9 (decimal 217)
  defining Unicode char U+00DA (decimal 218)
  defining Unicode char U+00DB (decimal 219)
  defining Unicode char U+00DC (decimal 220)
  defining Unicode char U+00DD (decimal 221)
  defining Unicode char U+00DE (decimal 222)
  defining Unicode char U+00DF (decimal 223)
  defining Unicode char U+00E0 (decimal 224)
  defining Unicode char U+00E1 (decimal 225)
  defining Unicode char U+00E2 (decimal 226)
  defining Unicode char U+00E3 (decimal 227)
  defining Unicode char U+00E4 (decimal 228)
  defining Unicode char U+00E5 (decimal 229)
  defining Unicode char U+00E6 (decimal 230)
  defining Unicode char U+00E7 (decimal 231)
  defining Unicode char U+00E8 (decimal 232)
  defining Unicode char U+00E9 (decimal 233)
  defining Unicode char U+00EA (decimal 234)
  defining Unicode char U+00EB (decimal 235)
  defining Unicode char U+00EC (decimal 236)
  defining Unicode char U+00ED (decimal 237)
  defining Unicode char U+00EE (decimal 238)
  defining Unicode char U+00EF (decimal 239)
  defining Unicode char U+00F0 (decimal 240)
  defining Unicode char U+00F1 (decimal 241)
  defining Unicode char U+00F2 (decimal 242)
  defining Unicode char U+00F3 (decimal 243)
  defining Unicode char U+00F4 (decimal 244)
  defining Unicode char U+00F5 (decimal 245)
  defining Unicode char U+00F6 (decimal 246)
  defining Unicode char U+00F8 (decimal 248)
  defining Unicode char U+00F9 (decimal 249)
  defining Unicode char U+00FA (decimal 250)
  defining Unicode char U+00FB (decimal 251)
  defining Unicode char U+00FC (decimal 252)
  defining Unicode char U+00FD (decimal 253)
  defining Unicode char U+00FE (decimal 254)
  defining Unicode char U+00FF (decimal 255)
  defining Unicode char U+0102 (decimal 258)
  defining Unicode char U+0103 (decimal 259)
  defining Unicode char U+0104 (decimal 260)
  defining Unicode char U+0105 (decimal 261)
  defining Unicode char U+0106 (decimal 262)
  defining Unicode char U+0107 (decimal 263)
  defining Unicode char U+010C (decimal 268)
  defining Unicode char U+010D (decimal 269)
  defining Unicode char U+010E (decimal 270)
  defining Unicode char U+010F (decimal 271)
  defining Unicode char U+0110 (decimal 272)
  defining Unicode char U+0111 (decimal 273)
  defining Unicode char U+0118 (decimal 280)
  defining Unicode char U+0119 (decimal 281)
  defining Unicode char U+011A (decimal 282)
  defining Unicode char U+011B (decimal 283)
  defining Unicode char U+011E (decimal 286)
  defining Unicode char U+011F (decimal 287)
  defining Unicode char U+0130 (decimal 304)
  defining Unicode char U+0131 (decimal 305)
  defining Unicode char U+0132 (decimal 306)
  defining Unicode char U+0133 (decimal 307)
  defining Unicode char U+0139 (decimal 313)
  defining Unicode char U+013A (decimal 314)
  defining Unicode char U+013D (decimal 317)
  defining Unicode char U+013E (decimal 318)
  defining Unicode char U+0141 (decimal 321)
  defining Unicode char U+0142 (decimal 322)
  defining Unicode char U+0143 (decimal 323)
  defining Unicode char U+0144 (decimal 324)
  defining Unicode char U+0147 (decimal 327)
  defining Unicode char U+0148 (decimal 328)
  defining Unicode char U+014A (decimal 330)
  defining Unicode char U+014B (decimal 331)
  defining Unicode char U+0150 (decimal 336)
  defining Unicode char U+0151 (decimal 337)
  defining Unicode char U+0152 (decimal 338)
  defining Unicode char U+0153 (decimal 339)
  defining Unicode char U+0154 (decimal 340)
  defining Unicode char U+0155 (decimal 341)
  defining Unicode char U+0158 (decimal 344)
  defining Unicode char U+0159 (decimal 345)
  defining Unicode char U+015A (decimal 346)
  defining Unicode char U+015B (decimal 347)
  defining Unicode char U+015E (decimal 350)
  defining Unicode char U+015F (decimal 351)
  defining Unicode char U+0160 (decimal 352)
  defining Unicode char U+0161 (decimal 353)
  defining Unicode char U+0162 (decimal 354)
  defining Unicode char U+0163 (decimal 355)
  defining Unicode char U+0164 (decimal 356)
  defining Unicode char U+0165 (decimal 357)
  defining Unicode char U+016E (decimal 366)
  defining Unicode char U+016F (decimal 367)
  defining Unicode char U+0170 (decimal 368)
  defining Unicode char U+0171 (decimal 369)
  defining Unicode char U+0178 (decimal 376)
  defining Unicode char U+0179 (decimal 377)
  defining Unicode char U+017A (decimal 378)
  defining Unicode char U+017B (decimal 379)
  defining Unicode char U+017C (decimal 380)
  defining Unicode char U+017D (decimal 381)
  defining Unicode char U+017E (decimal 382)
  defining Unicode char U+200C (decimal 8204)
  defining Unicode char U+2013 (decimal 8211)
  defining Unicode char U+2014 (decimal 8212)
  defining Unicode char U+2018 (decimal 8216)
  defining Unicode char U+2019 (decimal 8217)
  defining Unicode char U+201A (decimal 8218)
  defining Unicode char U+201C (decimal 8220)
  defining Unicode char U+201D (decimal 8221)
  defining Unicode char U+201E (decimal 8222)
  defining Unicode char U+2030 (decimal 8240)
  defining Unicode char U+2031 (decimal 8241)
  defining Unicode char U+2039 (decimal 8249)
  defining Unicode char U+203A (decimal 8250)
  defining Unicode char U+2423 (decimal 9251)
)
Now handling font encoding OT1 ...
... processing UTF-8 mapping file for font encoding OT1
 (C:\Programme\MikTeX2.9\tex\latex\base\ot1enc.dfu
File: ot1enc.dfu 2008/04/05 v1.1m UTF-8 support for inputenc
  defining Unicode char U+00A1 (decimal 161)
  defining Unicode char U+00A3 (decimal 163)
  defining Unicode char U+00B8 (decimal 184)
  defining Unicode char U+00BF (decimal 191)
  defining Unicode char U+00C5 (decimal 197)
  defining Unicode char U+00C6 (decimal 198)
  defining Unicode char U+00D8 (decimal 216)
  defining Unicode char U+00DF (decimal 223)
  defining Unicode char U+00E6 (decimal 230)
  defining Unicode char U+00EC (decimal 236)
  defining Unicode char U+00ED (decimal 237)
  defining Unicode char U+00EE (decimal 238)
  defining Unicode char U+00EF (decimal 239)
  defining Unicode char U+00F8 (decimal 248)
  defining Unicode char U+0131 (decimal 305)
  defining Unicode char U+0141 (decimal 321)
  defining Unicode char U+0142 (decimal 322)
  defining Unicode char U+0152 (decimal 338)
  defining Unicode char U+0153 (decimal 339)
  defining Unicode char U+2013 (decimal 8211)
  defining Unicode char U+2014 (decimal 8212)
  defining Unicode char U+2018 (decimal 8216)
  defining Unicode char U+2019 (decimal 8217)
  defining Unicode char U+201C (decimal 8220)
  defining Unicode char U+201D (decimal 8221)
)
Now handling font encoding OMS ...
... processing UTF-8 mapping file for font encoding OMS

(C:\Programme\MikTeX2.9\tex\latex\base\omsenc.dfu
File: omsenc.dfu 2008/04/05 v1.1m UTF-8 support for inputenc
  defining Unicode char U+00A7 (decimal 167)
  defining Unicode char U+00B6 (decimal 182)
  defining Unicode char U+00B7 (decimal 183)
  defining Unicode char U+2020 (decimal 8224)
  defining Unicode char U+2021 (decimal 8225)
  defining Unicode char U+2022 (decimal 8226)
)
Now handling font encoding OMX ...
... no UTF-8 mapping file for font encoding OMX

---

Teil 2:

Code:

---

Now handling font encoding OMX ...
... no UTF-8 mapping file for font encoding OMX
Now handling font encoding U ...
... no UTF-8 mapping file for font encoding U
  defining Unicode char U+00A9 (decimal 169)
  defining Unicode char U+00AA (decimal 170)
  defining Unicode char U+00AE (decimal 174)
  defining Unicode char U+00BA (decimal 186)
  defining Unicode char U+02C6 (decimal 710)
  defining Unicode char U+02DC (decimal 732)
  defining Unicode char U+200C (decimal 8204)
  defining Unicode char U+2026 (decimal 8230)
  defining Unicode char U+2122 (decimal 8482)
  defining Unicode char U+2423 (decimal 9251)
)) (C:\Programme\MikTeX2.9\tex\latex\base\fontenc.sty
Package: fontenc 2005/09/27 v1.99g Standard LaTeX package

(C:\Programme\MikTeX2.9\tex\latex\base\ot1enc.def
File: ot1enc.def 2005/09/27 v1.99g Standard LaTeX file
LaTeX Font Info:    Redeclaring font encoding OT1 on input line 43.
)) (C:\Programme\MikTeX2.9\tex\generic\babel\babel.sty
Package: babel 2008/07/08 v3.8m The Babel package

*************************************
* Local config file bblopts.cfg used
*
(C:\Programme\MikTeX2.9\tex\latex\00miktex\bblopts.cfg
File: bblopts.cfg 2006/07/31 v1.0 MiKTeX 'babel' configuration
) (C:\Programme\MikTeX2.9\tex\generic\babel\ngermanb.ldf
Language: ngermanb 2008/07/06 v2.6n new German support from the babel system

(C:\Programme\MikTeX2.9\tex\generic\babel\babel.def
File: babel.def 2008/07/08 v3.8m Babel common definitions
\babel@savecnt=\count88
\U@D=\dimen103
)
\l@naustrian = a dialect from \language\l@ngerman
Package babel Info: Making " an active character on input line 92.
)) (C:\Programme\MikTeX2.9\tex\latex\tools\array.sty
Package: array 2008/09/09 v2.4c Tabular extension package (FMi)
\col@sep=\dimen104
\extrarowheight=\dimen105
\NC@list=\toks17
\extratabsurround=\skip47
\backup@length=\skip48
)
(C:\Programme\MikTeX2.9\tex\latex\hyperref\hyperref.sty
Package: hyperref 2011/12/04 v6.82m Hypertext links for LaTeX
 (C:\Programme\MikTeX2.9\tex\generic\oberdiek\hobsub-hyperref.sty
Package: hobsub-hyperref 2011/04/23 v1.4 Bundle oberdiek, subset hyperref (HO)
(C:\Programme\MikTeX2.9\tex\generic\oberdiek\hobsub-generic.sty
Package: hobsub-generic 2011/04/23 v1.4 Bundle oberdiek, subset generic (HO)
Package: hobsub 2011/04/23 v1.4 Subsetting bundle oberdiek (HO)
Package: infwarerr 2010/04/08 v1.3 Providing info/warning/message (HO)
Package: ltxcmds 2011/04/18 v1.20 LaTeX kernel commands for general use (HO)
Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO)
Package ifluatex Info: LuaTeX not detected.
Package: ifvtex 2010/03/01 v1.5 Switches for detecting VTeX and its modes (HO)
Package ifvtex Info: VTeX not detected.
Package: intcalc 2007/09/27 v1.1 Expandable integer calculations (HO)
Package: ifpdf 2011/01/30 v2.3 Provides the ifpdf switch (HO)
Package ifpdf Info: pdfTeX in PDF mode is detected.
Package: etexcmds 2011/02/16 v1.5 Prefix for e-TeX command names (HO)
Package etexcmds Info: Could not find \expanded.
(etexcmds)            That can mean that you are not using pdfTeX 1.50 or
(etexcmds)            that some package has redefined \expanded.
(etexcmds)            In the latter case, load this package earlier.
Package: kvsetkeys 2011/04/07 v1.13 Key value parser (HO)
Package: kvdefinekeys 2011/04/07 v1.3 Defining keys (HO)
Package: pdftexcmds 2011/04/22 v0.16 Utilities of pdfTeX for LuaTeX (HO)
Package pdftexcmds Info: LuaTeX not detected.
Package pdftexcmds Info: \pdf@primitive is available.
Package pdftexcmds Info: \pdf@ifprimitive is available.
Package pdftexcmds Info: \pdfdraftmode found.
Package: pdfescape 2011/04/04 v1.12 Provides string conversions (HO)
Package: bigintcalc 2011/01/30 v1.2 Expandable big integer calculations (HO)
Package: bitset 2011/01/30 v1.1 Data type bit set (HO)
Package: uniquecounter 2011/01/30 v1.2 Provides unlimited unique counter (HO)
)
Package hobsub Info: Skipping package `hobsub' (already loaded).
Package: letltxmacro 2010/09/02 v1.4 Let assignment for LaTeX macros (HO)
Package: hopatch 2011/01/30 v1.0 Wrapper for package hooks (HO)
Package: xcolor-patch 2011/01/30 xcolor patch
Package: atveryend 2011/04/23 v1.7 Hooks at very end of document (HO)
Package: atbegshi 2011/01/30 v1.15 At begin shipout hook (HO)
Package: refcount 2010/12/01 v3.2 Data extraction from references (HO)
Package: hycolor 2011/01/30 v1.7 Color options of hyperref/bookmark (HO)
)
(C:\Programme\MikTeX2.9\tex\generic\ifxetex\ifxetex.sty
Package: ifxetex 2010/09/12 v0.6 Provides ifxetex conditional
) (C:\Programme\MikTeX2.9\tex\latex\oberdiek\kvoptions.sty
Package: kvoptions 2010/12/23 v3.10 Keyval support for LaTeX options (HO)
)
\@linkdim=\dimen106
\Hy@linkcounter=\count89
\Hy@pagecounter=\count90

(C:\Programme\MikTeX2.9\tex\latex\hyperref\pd1enc.def
File: pd1enc.def 2011/12/04 v6.82m Hyperref: PDFDocEncoding definition (HO)
Now handling font encoding PD1 ...
... no UTF-8 mapping file for font encoding PD1
)
\Hy@SavedSpaceFactor=\count91
 (C:\Programme\MikTeX2.9\tex\latex\00miktex\hyperref.cfg
File: hyperref.cfg 2002/06/06 v1.2 hyperref configuration of TeXLive
)
Package hyperref Info: Hyper figures OFF on input line 4046.
Package hyperref Info: Link nesting OFF on input line 4051.
Package hyperref Info: Hyper index ON on input line 4054.
Package hyperref Info: Plain pages OFF on input line 4061.
Package hyperref Info: Backreferencing OFF on input line 4066.
Package hyperref Info: Implicit mode ON; LaTeX internals redefined.
Package hyperref Info: Bookmarks ON on input line 4284.
\c@Hy@tempcnt=\count92

(C:\Programme\MikTeX2.9\tex\latex\ltxmisc\url.sty
\Urlmuskip=\muskip10
Package: url 2006/04/12  ver 3.3  Verb mode for urls, etc.
)
LaTeX Info: Redefining \url on input line 4637.
\Fld@menulength=\count93
\Field@Width=\dimen107
\Fld@charsize=\dimen108
Package hyperref Info: Hyper figures OFF on input line 5757.
Package hyperref Info: Link nesting OFF on input line 5762.
Package hyperref Info: Hyper index ON on input line 5765.
Package hyperref Info: backreferencing OFF on input line 5772.
Package hyperref Info: Link coloring OFF on input line 5777.
Package hyperref Info: Link coloring with OCG OFF on input line 5782.
Package hyperref Info: PDF/A mode OFF on input line 5787.
LaTeX Info: Redefining \ref on input line 5827.
LaTeX Info: Redefining \pageref on input line 5831.
\Hy@abspage=\count94
\c@Item=\count95
\c@Hfootnote=\count96
)

Package hyperref Message: Driver (autodetected): hpdftex.

(C:\Programme\MikTeX2.9\tex\latex\hyperref\hpdftex.def
File: hpdftex.def 2011/12/04 v6.82m Hyperref driver for pdfTeX
\Fld@listcount=\count97
\c@bookmark@seq@number=\count98
 (C:\Programme\MikTeX2.9\tex\latex\oberdiek\rerunfilecheck.sty
Package: rerunfilecheck 2011/04/15 v1.7 Rerun checks for auxiliary files (HO)
Package uniquecounter Info: New unique counter `rerunfilecheck' on input line 282.
)
\Hy@SectionHShift=\skip49
)
(C:\Programme\MikTeX2.9\tex\latex\biblatex\biblatex.sty
Package: biblatex 2011/11/13 v1.7 programmable bibliographies
 (C:\Programme\MikTeX2.9\tex\latex\etoolbox\etoolbox.sty
Package: etoolbox 2011/01/03 v2.1 e-TeX tools for LaTeX

(C:\Programme\MikTeX2.9\tex\latex\misc\etex.sty
Package: etex 1998/03/26 v2.0 eTeX basic definition package (PEB)
\et@xins=\count99
)
\etb@tempcnta=\count100
) (C:\Programme\MikTeX2.9\tex\latex\logreq\logreq.sty
Package: logreq 2010/08/04 v1.0 xml request logger
\lrq@indent=\count101

(C:\Programme\MikTeX2.9\tex\latex\logreq\logreq.def
File: logreq.def 2010/08/04 v1.0 logreq spec v1.0
)) (C:\Programme\MikTeX2.9\tex\latex\base\ifthen.sty
Package: ifthen 2001/05/26 v1.1c Standard LaTeX ifthen package (DPC)
)
\c@listtotal=\count102
\c@listcount=\count103
\c@liststart=\count104
\c@liststop=\count105
\c@citecount=\count106
\c@citetotal=\count107
\c@multicitecount=\count108
\c@multicitetotal=\count109
\c@instcount=\count110
\c@maxnames=\count111
\c@minnames=\count112
\c@maxitems=\count113
\c@minitems=\count114
\c@citecounter=\count115
\c@savedcitecounter=\count116
\c@uniquelist=\count117
\c@uniquename=\count118
\c@refsection=\count119
\c@refsegment=\count120
\c@maxextrayear=\count121
\c@maxextraalpha=\count122
\c@abbrvpenalty=\count123
\c@highnamepenalty=\count124
\c@lownamepenalty=\count125
\c@maxparens=\count126
\c@parenlevel=\count127
\blx@tempcnta=\count128
\blx@tempcntb=\count129
\blx@tempcntc=\count130
\blx@maxsection=\count131
\blx@maxsegment=\count132
\blx@notetype=\count133
\blx@parenlevel@text=\count134
\blx@parenlevel@foot=\count135
\labelnumberwidth=\skip50
\labelalphawidth=\skip51
\shorthandwidth=\skip52
\biblabelsep=\skip53
\bibitemsep=\skip54
\bibnamesep=\skip55
\bibinitsep=\skip56
\bibparsep=\skip57
\bibhang=\skip58
\blx@auxin=\read1
\blx@auxout=\write3
\c@mincomprange=\count136
\c@maxcomprange=\count137
\c@mincompwidth=\count138
\c@labelname=\count139
\c@savedlabelname=\count140
\c@author=\count141
\c@savedauthor=\count142
\c@shortauthor=\count143
\c@savedshortauthor=\count144
\c@editor=\count145
\c@savededitor=\count146
\c@editora=\count147
\c@savededitora=\count148
\c@editorb=\count149
\c@savededitorb=\count150
\c@editorc=\count151
\c@savededitorc=\count152
\c@shorteditor=\count153
\c@savedshorteditor=\count154
\c@bookauthor=\count155
\c@savedbookauthor=\count156
\c@translator=\count157
\c@savedtranslator=\count158
\c@annotator=\count159
\c@savedannotator=\count160
\c@commentator=\count161
\c@savedcommentator=\count162
\c@introduction=\count163
\c@savedintroduction=\count164
\c@foreword=\count165
\c@savedforeword=\count166
\c@afterword=\count167
\c@savedafterword=\count168
\c@holder=\count169
\c@savedholder=\count170
\c@namea=\count171
\c@savednamea=\count172
\c@nameb=\count173
\c@savednameb=\count174
\c@namec=\count175
\c@savednamec=\count176
\c@institution=\count177
\c@savedinstitution=\count178
\c@language=\count179
\c@savedlanguage=\count180
\c@location=\count181
\c@savedlocation=\count182
\c@organization=\count183
\c@savedorganization=\count184
\c@origlocation=\count185
\c@savedoriglocation=\count186
\c@origpublisher=\count187
\c@savedorigpublisher=\count188
\c@pageref=\count189
\c@savedpageref=\count190
\c@publisher=\count191
\c@savedpublisher=\count192
\c@lista=\count193
\c@savedlista=\count194
\c@listb=\count195
\c@savedlistb=\count196
\c@listc=\count197
\c@savedlistc=\count198
\c@listd=\count199
\c@savedlistd=\count200
\c@liste=\count201
\c@savedliste=\count202
\c@listf=\count203
\c@savedlistf=\count204
Package biblatex Info: Trying to load compatibility code...
Package biblatex Info: ... file 'blx-compat.def' found.

(C:\Programme\MikTeX2.9\tex\latex\biblatex\blx-compat.def
File: blx-compat.def 2011/11/13 v1.7 biblatex generic compatibility
)
Package biblatex Info: Trying to load generic definitions...
Package biblatex Info: ... file 'biblatex.def' found.
 (C:\Programme\MikTeX2.9\tex\latex\biblatex\biblatex.def
File: biblatex.def 2011/11/13 v1.7 biblatex generic definitions
\c@biburlnumpenalty=\count205
\c@biburlucpenalty=\count206
\c@biburllcpenalty=\count207
\c@smartand=\count208
)
Package biblatex Info: Trying to load natbib compatibility...
Package biblatex Info: ... file 'blx-natbib.def' found.

(C:\Programme\MikTeX2.9\tex\latex\biblatex\blx-natbib.def
File: blx-natbib.def 2011/11/13 v1.7 biblatex natbib compatibility
)
Package biblatex Info: Trying to load bibliography style 'apa'...
Package biblatex Info: ... file 'apa.bbx' found.
 (C:\Programme\MikTeX2.9\tex\latex\biblatex-apa\apa.bbx
File: apa.bbx 2012/07/01 v5.0 APA biblatex references style
Package biblatex Info: Trying to load bibliography style 'standard'...
Package biblatex Info: ... file 'standard.bbx' found.

(C:\Programme\MikTeX2.9\tex\latex\biblatex\bbx\standard.bbx
File: standard.bbx 2011/11/13 v1.7 biblatex bibliography style
)

Package biblatex Warning: Macro 'reviewauthor' undefined.
(biblatex)                Using \newbibmacro.

)
Package biblatex Info: Trying to load citation style 'apa'...
Package biblatex Info: ... file 'apa.cbx' found.
 (C:\Programme\MikTeX2.9\tex\latex\biblatex-apa\apa.cbx
File: apa.cbx 2012/07/01 5.0 APA biblatex citation style
Package biblatex Info: Redefining '\parencite'.
Package biblatex Info: Redefining '\fullcite'.
Package biblatex Info: Redefining '\citeyear'.
Package biblatex Info: Redefining '\cite'.
Package biblatex Info: Redefining '\footcite'.
Package biblatex Info: Redefining '\textcites'.
Package biblatex Info: Redefining '\textcite'.
Package biblatex Info: Redefining '\citeauthor'.
)
Package biblatex Info: Trying to load configuration file...
Package biblatex Info: ... file 'biblatex.cfg' found.
 (C:\Programme\MikTeX2.9\tex\latex\biblatex\biblatex.cfg
File: biblatex.cfg
))
(C:\Programme\MikTeX2.9\tex\latex\csquotes\csquotes.sty
Package: csquotes 2011/10/22 v5.1d context-sensitive quotations
\csq@reset=\count209
\csq@gtype=\count210
\csq@glevel=\count211
\csq@qlevel=\count212
\csq@maxlvl=\count213
\csq@tshold=\count214
\csq@ltx@everypar=\toks18
 (C:\Programme\MikTeX2.9\tex\latex\csquotes\csquotes.def

---

Naja, und noch ein Teil 3:

Code:

---

File: csquotes.def 2011/10/22 v5.1d csquotes generic definitions
)
Package csquotes Info: Trying to load configuration file 'csquotes.cfg'...
Package csquotes Info: ... configuration file loaded successfully.

(C:\Programme\MikTeX2.9\tex\latex\csquotes\csquotes.cfg
File: csquotes.cfg
)
Package csquotes Info: Enabling multilingual quotes.
Package csquotes Info: Redefining alias 'german' -> 'german/guillemets'.
Package csquotes Info: Redefining alias 'english' -> 'english/british'.
Package csquotes Info: Redefining alias 'french' -> 'french/guillemets'.
)
Package biblatex Info: Trying to load language 'ngerman' -> 'ngerman-apa'...
Package biblatex Info: ... file 'ngerman-apa.lbx' found.
 (C:\Programme\MikTeX2.9\tex\latex\biblatex-apa\ngerman-apa.lbx
File: ngerman-apa.lbx 2012/07/01 v5.0 APA biblatex localisation
Package biblatex Info: Trying to load language 'ngerman'...
Package biblatex Info: ... file 'ngerman.lbx' found.
(C:\Programme\MikTeX2.9\tex\latex\biblatex\lbx\ngerman.lbx
File: ngerman.lbx 2011/11/13 v1.7 biblatex localization
Package biblatex Info: Trying to load language 'german'...
Package biblatex Info: ... file 'german.lbx' found.
 (C:\Programme\MikTeX2.9\tex\latex\biblatex\lbx\german.lbx
File: german.lbx 2011/11/13 v1.7 biblatex localization
)))
Package csquotes Info: Checking for multilingual support...
Package csquotes Info: ... found 'babel' package.

(D:\OvGU\Verlängerung\DFG_AntrVerl\Tescht.aux)
LaTeX Font Info:    Checking defaults for OML/cmm/m/it on input line 19.
LaTeX Font Info:    ... okay on input line 19.
LaTeX Font Info:    Checking defaults for T1/cmr/m/n on input line 19.
LaTeX Font Info:    ... okay on input line 19.
LaTeX Font Info:    Checking defaults for OT1/cmr/m/n on input line 19.
LaTeX Font Info:    ... okay on input line 19.
LaTeX Font Info:    Checking defaults for OMS/cmsy/m/n on input line 19.
LaTeX Font Info:    ... okay on input line 19.
LaTeX Font Info:    Checking defaults for OMX/cmex/m/n on input line 19.
LaTeX Font Info:    ... okay on input line 19.
LaTeX Font Info:    Checking defaults for U/cmr/m/n on input line 19.
LaTeX Font Info:    ... okay on input line 19.
LaTeX Font Info:    Checking defaults for PD1/pdf/m/n on input line 19.
LaTeX Font Info:    ... okay on input line 19.
\AtBeginShipoutBox=\box27
Package hyperref Info: Link coloring OFF on input line 19.
 (C:\Programme\MikTeX2.9\tex\latex\hyperref\nameref.sty
Package: nameref 2010/04/30 v2.40 Cross-referencing by name of section

(C:\Programme\MikTeX2.9\tex\generic\oberdiek\gettitlestring.sty
Package: gettitlestring 2010/12/03 v1.4 Cleanup title references (HO)
)
\c@section@level=\count215

---

Zitat:

---

Abgesehen davon: Du hast deutlich ältere Paketversionen als ich.

---

Ich update gerade 'mal meine Pakete. Bin i.d.R. nicht sehr emsig damit, da mir MikTeX schon zweimal die Pakete arg durcheinander gewirbelt hat und danach eine Neuinstallation fällig war. 'Mal sehen, ob es vielleicht tatsächlich an einem alten Paket liegt.


@nixversteh

Zitat:

---

Hast du meinen Code eingesetzt? Was passiert?
Unter Linux und Texlive 2012 und Kile getestet.
Gruß
Martin

---

Ja, den habe ich eingefügt. Produziert keinen zusätzlichen Fehler, aber eine Bibliographie wird damit leider immer noch nicht ausgespuckt. :confused: Einen Versuch war es sicher wert, manchmal hängt es ja an Kleinigkeiten...

Zitat:

---

Wenn es hilft, dann die vollständige log-Datei in zwei Schritten (wg. Zeichenbegrenzung auf 15.000 Zeichen):

---

Man kann log-Datei (Endung z.B. in txt ändern) auch einfach anhängen.

Ansonsten denke solltest du jetzt erstmal update. Mir fehlte übrigens die apa.dbx, ich musste sie von CTAN holen.

Zitat:

---

Zitat von u_fischer

Ansonsten denke solltest du jetzt erstmal update. Mir fehlte übrigens die apa.dbx, ich musste sie von CTAN holen.

---

Super, ganz vielen Dank, daran hat es gelegen!! Jetzt gibt es weniger Warnungen (und die haben nichts mit der Bibliographie zu tun), UND ein Literaturverzeichnis!! Wäre ich doch 'mal ein paar Stündchen eher drauf gekommen! :-s

Ganz vielen Dank Euch Dreien für Eure Hilfe!!